Journal Publications

To date, a total number of 235 journal publications exist either published  or in-press by the Department of Materials Science and Engineering faculty. 

2013

  1. Tarig A. Hassan, Vijay K. Rangari, Rohit K. Rana, Shaik Jeelani, “Sonochemical effect on size reduction of CaCO3 nanoparticles derived from waste Eggshells,” (In press, Ultrasonics Sonochemistry, 2013.
  2. Tarig A. Hassan, Vijaya K. Rangari and Shaik. Jeelani, “Mechanical and thermal properties of bio-based CaCO3/Soybean based hybrid unsaturated polyester nanocomposites,” Accepted for publication Journal of Applied Polymer Science, 2013.
  3. Nydeia W. Bolden, Vijaya K. Rangari,Shaik Jeelani, Seyhan Boyoglu, Shree R. Singh, “Synthesis and evaluation of magnetic nanoparticles for biomedical applications,” Under review for Journal of nanoparticles-2013
  4. M.M Rahman, S. Zainuddin, M.V. Hosur, C.J. Robertson,  Ashok Kumar, J. Trovillion, S. Jeelani, “Effect of NH2-MWCNTs on Crosslink Density of Epoxy Matrix and ILSS Properties of E-glass/Epoxy Composites,” Composite Structures 95, 2013, pp. 213-221.
  5. M. K. Hossain, M. E. Hossain, M.W. Dewan, M. V. Hosur, and S. Jeelani, “Effects of Carbon Nanofibers (CNFs) on Thermal and Interlaminar Shear Responses of E-Glass/Polyester Composites”, Composites, Part B 44 (1), 2013, pp.313-320. 

2012

  1. Tarig A. Hassan, Vijay K. Rangari, ShaikJeelani, Sonochemical Synthesis and Characterization of Bio-Based Hydroxyapatite nanoparticles, Int. J. Nano and Biomaterials, (In press), 2012
  2. Vijaya K Rangari, RahmanSamsur, and  ShaikJeelani, Mechanical, thermal, and conducting properties of CNTs / Bio-degradable Polymer Thin films, Journal of Applied Polymer Science ( In press), 2012
  3. Williams. T, Hosur. M, Theodore. M, Netravali. A, Rangari. V, Jeelani. S, Time Effects on Morphology and Bonding Ability in Mercerized natural Fibers for Composite Reinforcement,  International Journal of Polymer Science (Accepted)2012.
  4. Vijaya K. Rangari, Ghouse M Mohammad, Boyoglu, Seyhan, ShaikJeelani, Synthesis of hybrid ZnO/CNTs nanoparticles and their reinforcement in Nylon-6 polymer fibers, Journal of Applied Polymer Science (In press), 2012.
  5. Mohammad Washim Dewan, Mohammad Kamal Hossain, Mahesh Hosur, and Shaik Jeelani, “Thermo-Mechanical Properties of Alkali Treated Jute-Polyester/Nanoclay Biocomposites Fabricated by VARTM Process,” accepted for publication in Applied Polymer Science, Sept 26, 2012.
  6. Williams, T, Hosur, M., Vaidya, U., and Jeelani, S., “Effect of Alkali Treatment on Physical Properties of Bio-based Composites,” accepted for publication in Polymers and Polymer Composites, August 20, 2012.
  7. Alfred Tcherbi-Narteh, Mahesh Hosur and Shaik Jeelani, “Influence of Nanoclay on the Durability of Woven Carbon/Epoxy Composites Subjected to Ultraviolet Radiation,” accepted for publication in Sadhana (Indian Academy of Science), July 2012.
  8. Mahesh Hosur, Rajib Barua, Shaik Zainuddin, Ashok Kumar, Jonathan Trovillion and Shaik Jeelani, “Rheology, Flexure and Thermomechanical Characterization of Epoxy/CNF Nanocomposites: Effect of Dispersion Techniques,” Polymers and Polymer Composites 20 (6), 2012, pp. 517-530.
  9. Muhammad M. Rahman, Mahesh Hosur, Shaik Zainuddin, Kailash C. Jajam, Hareesh V. Tippur, Shaik Jeelani, “Mechanical characterization of epoxy composites modified with reactive polyol diluent and randomly-oriented amino-functionalized MWCNTs,” Polymer Testing 31, 2012, pp. 1083-1093.
  10. Mahesh Hosur, Rajib Barua, Shaik Zainuddin, Ashok Kumar, Jonathan Trovillion and Shaik Jeelani, “Effect of Processing Techniques on the Performance of Epoxy/MWCNT Nanocomposites,” Journal of Applied Polymer Science, accepted on April 27, 2012, published online DOI-10.1002/app.37990.
  11. Muhammad M. Rahman, Mahesh Hosur, Adriane G. Ludwick, Shaik Zainuddin, Ashok Kumar, Jonathan Trovillion, Shaik Jeelani, “Thermo-mechanical behavior of epoxy composites modified with reactive polyol diluent and randomly-oriented amino-functionalized multi-walled carbon nanotubes,” Polymer Testing 31, 2012, pp. 777-784.
  12. M.M. Rahman, S. Zainuddin, M. V. Hosur, J.E. Malone, M.B.A. Salam, Ashok Kumar, and S. Jeelani, “Improvements in mechanical and thermo-mechanical properties of E-glass/epoxy composites using amino functionalized MWCNTs,” Composite Structures 94, 2012, pp. 2397-2406.
  13. Yuanxin Zhou, Mahesh Hosur, Shaik Jeelani and P. K. Mallick, “Fabrication and Characterization of Carbon Fiber Reinforced Clay/Epoxy Composite,” Journal of Materials Science, 47: 2012, 5002-5012. DOI 10:1007/s 10853-012-6376-4.
  14. Nakamura, R., Netravali, A. N., and Hosur, M., “Effect of Halloysite Nanotubes on Interfacial Property between Carbon Fiber and Epoxy Resin,” J Adhes. Sci. Tech. 26, 2012, pp. 1295-1312.
  15. Merlin Theodore, Mahesh Hosur, Jonathan Thomas, Shaik Jeelani, “Effects of functionalisation on curing and decomposition behaviour of Epoxy-MWCNT Nanocomposites,” Polymer and Polymer Composites 20 (4), 2012, pp. 343-352.
  16. JitenderMadan, Bharat Baruah, MulpuriNagaraju, Mohamed O. Abdalla, Clayton Yates, Timothy Turner, Vijay Rangari, Donald Hamelberg, and RituAneja, Molecular Cycloencapsulation Augments Solubility and Improves Therapeutic Index of Brominated Noscapine in Prostate Cancer Cells, Mol. Pharmaceutics 9 (5), 2012, pp 1470–1480.        

2011

  1. Hassan Mahfuz, Felicia Powell, Richard Granata, Mahesh Hosur and Mujib Khan “Coating of Carbon Fiber with Polyhedral Oligomeric Silsesquioxane (POSS) to Enhance Mechanical Properties and Durability of Carbon/Vinyl Ester Composites,” Materials 4, 2011, 1619-1631; doi:10.3390/ma4091619.
  2. M. K. Hossain, M.W. Dewan, M. V. Hosur, and S. Jeelani, “Physical, Mechanical, and Degradability Properties of Chemically Treated Jute Fiber Reinforced Biodegradable Nanocomposites,” Journal of Engineering Materials and Technology (JEMT) 133, October 2011, pp. 041003:1-7.
  3. M. K. Hossain, K. A. Imran, M. V. Hosur, and S. Jeelani, “Degradation of Mechanical Properties of Conventional and Nanophased Carbon/Epoxy Composites in Seawater,” Journal of Engineering Materials and Technology (JEMT) 133, 2011, pp. 041004:1-6.
  4. Chinedu U. Okoro, Mohammad K. Hossain, Mahesh Hosur, and Shaik Jeelani, “Mechanical Characterization of XD-Grade Carbon Nanotube/Epon 862 Processed by Dual Phase Dispersion Technique,” Journal of Engineering Materials and Technology (JEMT) 133, 2011, pp. 041009:1-4.
  5. M. K. Hossain, M. W. Dewan, M. V. Hosur, and S. Jeelani, “Effect of Surface Treatment and Nanoclay on Thermal and Mechanical Performances of Jute/Biopol Green Composites,” Journal of Reinforced Plastics and Composites 30 (22), 2011, pp. 1841-1856.
  6. Tiffany Williams, Mahesh Hosur, Merlin Theodore, Anil N. Netravali, Vijaya Rangari and Shaik Jeelani, “Time Effects on Morphology and Bonding Ability in Mercerized Natural Fibers for Composite Reinforcement,” International Journal of Polymer Science, vol. 2011, Article ID 192865, doi:10.1155/2011/192865.
  7. Mohammad K. Hossain, Mohammad W. Dewan, Mahesh Hosur and Shaik Jeelani, “Mechanical performances of surface modified jute fiber reinforced biopol nanophased green composites,” Composites, Part B. 42, 2011, 1701-1707.
  8. Mohammad K Hossain, Kazi Al Imran, Mahesh Hosur and Shaik Jeelani, “Effect of Seawater on Thermal Behavior of Conventional and Nanophased Carbon/Epoxy Composites,” Cambridge Journal Online, Published online March 14, 2011.
  9. Mohammad K Hossain, Mohammad W Dewan, Mahesh Hosur and Shaik Jeelani, “Thermal and Mechanical Characterization of Jute-Biopol Nanophased Green Composites,” Cambridge Journal Online 2011, DOI: 10.1557/opl.2011.169, published online January 28, 2011
  10. Muhammad E. Hossain, Mohammad K. Hossain, Mahesh V. Hosur and Shaik Jeelani, “Study of Mechanical Responses and Thermal Expansion of CNF-modified Polyester Nanocomposites Processed by Different Mixing Systems,”  Cambridge Journal Online, DOI:10.1557/opl.2011.111, published online January 28, 2011.
  11. S. Zainuddin, M. V. Hosur, R. Barua,  Ashok Kumar and S. Jeelani, “Effects of ultraviolet radiation and condensation on static and high strain rate compression behavior of nanoclay infused glass/ epoxy composites,” Journal of Composite Materials,  45(18), 2011, pp. 1901-1918.
  12. M. K. Hossain, M. E. Hossain. M. V. Hosur, and S. Jeelani, “Flexural and Compression Response of Woven E-Glass/Polyester-CNF Nanophased Composites,” Composites A, 42, 2011, 1174-1182.
  13. Merlin Theodore, Mahesh Hosur, Jonathan Thomas, Shaik Jeelani, “Influence of Functionalization on Properties of MWCNT-Epoxy Nanocomposites,” Materials Science & Engineering A, Mater. Sci. Eng. A 528 (3), 2011, pp. 1192-1200.
  14. Vijaya K. Rangri, Mohammad S. Bhuyan, ShaikJeelani, Comparative study of microwave and thermal curing of high temperature epoxy/CNTs polymer nanocomposites and their properties, International Journal of Nanoscience10 (6), 2011, 1225-1230.
  15. Vijaya K. Rangri, Mohammad S. Bhuyan, ShaikJeelani, Microwave curing of CNFs/EPON-862 nanocomposites and their thermal and mechanical properties, Composite-A 42(7), 2011, 849-858.
  16. Mujibur R. Khan, Hassan Mahfuz, Theodora Leventouri, Vijaya K. Rangari and Andreas Kyriacou. Enhancing toughness of low-density polyethylene filaments through infusion of multiwalled carbon nanotubes and ultrahigh molecular weight polyethylene, Polymer Engineering & Science 51(4), 2011, 654–662.
  17. O. Malkina, H. Mahfuz, K. D. SorgeVijaya. K. Rangari, Anisotropic physical properties of SC-15 epoxy reinforced with magnetic nanofillers under uniform magnetic field,” J Mater Sci 46, 2011, 3982–3988.
  18. Vijaya K. Rangari, Mohammad Y.Shaik,  Ghouse M. Mohammad, ShaikJeelani, Reinforcement of Si3N4 nanoparticles in Polypropylene single fibers through melt extrusion process and their properties  Journal of Applied Polymer Science 121(3), 2011, 1512–1520. 

2010

  1. S. Zainuddin, M.V. Hosur, Y. Zhou, Alfred T. Narteh, A. Kumar, S. Jeelani, “Experimental and Numerical Investigations on Flexure and Thermal Properties of Nanoclay-Epoxy Nanocomposites,” Materials Science and Engineering A 527, 7920-7926, 2010.
  2. S. Zainuddin, M. V. Hosur, A. Kumar, and S. Jeelani, “Durability Study of Neat/Nanophased GFRP Composites Subjected to Different Environmental Conditioning,” Materials Science and Engineering A, 527, 2010, pp. 3091-3099.
  3. Yuanxin Zhou, Evert White, Mahesh Hosur, Shaik Jeelani, “Effect of particle size and weight fraction on the flexural strength and failure mode of TiO2 particles reinforced epoxy,” Materials Letters, 64, 2010, pp. 806-809.
  4. Mahesh V. Hosur, Tamanna Rahman, Shaik Jeelani, “Mechanical and Thermal Properties of Amine Functionalized Multi-walled Carbon Nanotubes Epoxy Based Nanocomposite,” Composite Interfaces, Vol. 17, 2010, pp. 197-215.
  5. Rajib Barua, Mahesh Hosur, Shaik Zainuddin, Shaik Jeelani, Ashok Kumar, Jonathan Trovillion, Yadira Parez, “Processing and Characterization of Epoxy Nanocomposites with MWCNT’s/CNF’s Using Thinky and 3-Roll Shear Mixing Techniques,” Revista Materia 15, 247-253, 2010.
  6. S. Zainuddin, H. Mahfuz, S. Jeelani, “Enhancing Fatigue Performance of Sandwich Composites with Nanophased Core,” Journal of Nanomaterials 2010, doi:10.1155/2010/712731, 2010.
  7. H. Kumar, M. V. Hosur and A. N. Netravali, “Characterization of interface properties of clay nanoplatelets filled epoxy resin and carbon fiber by single fiber composite technique,” Journal of Adhesive Science and Technology, 24 (1), 2010, pp. 217-236.
  8. Mahesh V. Hosur, Md. Mazedul Islam, Shaik Jeelani, “Processing and performance of nanophased braided carbon/epoxy composites,” Materials Science and Engineering B, 168, 2010, pp. 22-29.
  9. Mohamed O. Abdalla, Ritu Aneja, Derrick Dean, Vijay Rangari, AlbertRussell, Jessie Jaynes, Clayton Yates and Timothy Turner, “Synthesis and characterization of noscapine loaded magnetic polymeric nanoparticles,” Journal of Magnetism and Magnetic Materials 322,190-196,2010
  10. Tarig A Hassan, Vijay K Rangari* and Shaik Jeelani, “Synthesis, processing and characterization of shear thickening fluid (STF)  pregnated fabric composites,” Mat Sci &Eng-A, 527, 2892-2899, 2010
  11. Wanda D. Jones, Vijaya K. Rangari and Shaik Jeelani, “Synthesis and characterization of (Fe3O4 /MWCNTs) / Epoxy Nanocomposites,”  J. Applied Polymer Science, 116, 2783-2792, 2010
  12. Rangari, Vijaya; Mohammad, Ghouse; Jeelani, Shaik; Butenko, Yuri; Dhanak, Vinod, “Synthesis and characterization of diamond coated CNTs and their reinforcement in Nylon-6 single fiber,” ACS Applied Materials & Interfaces 2010, 2 (7), 1829–1834.
  13. Vijaya K. Rangari, Ghouse M. Mohammad, Shaik Jeelani, Angel Hundley, Komal Vig, Shree Ram Singh and Shreekumar Pillai, “Synthesis of Ag/CNTs hybrid nanoparticles and fabrication of their Nylon-6 polymer nanocomposite fibers for antimicrobial applications,” Nanotechnology, 21, 095102, 2010
  14. Tarig A. Hassan, Vijaya K. Rangari* and Shaik Jeelani., “Sonochemical synthesis and rheological properties of shear thickening dispersions,” J Ultrasonic and sonochemistry, Volume 17, Issue 5, June 2010, Pages 947-952
  15. Vijaya K. Rangri, Mohammad S. Bhuyan, Shaik Jeelani, “Microwave Processing and Charactering of EPON 862/CNTs Nanocomposites,” Mat Sci & Eng –B, Volume 168, Issues 1-3, 15 April 2010, Pages 117-121
  16. Yuanxin Zhou, Yang Wang, Yuanming Xia, and Shaik Jeelani, Tensile behavior of carbon fiber bundles at different strain rates, Materials Letters, Volume 64, Issue 3, 15 February 2010, Pages 246-248.
  17. Mohamed O. Abdalla, Ritu Aneja, Derrick Dean, Vijay Rangari, Albert Russell, Jessie Jaynes, Clayton Yates and Timothy Turner, “Synthesis and characterization of noscapine loaded magnetic polymeric nanoparticles Journal of Magnetism and Magnetic Materials,” Volume 322, Issue 2, January 2010, Pages 190-196.
  18.  Komal Vig, Seyhan Boyoglu, Vijaya Rangari, Michael Miller, Shreekumar Pillai, Shree R. Singh, “Respiratory Syncytial Virus Interactions with Nanoparticles Using Transmission Electron Microscopy.”  Biophysical Journal, Volume 98, Issue 3, Supplement 1, January 2010, Page 655a. 

2009

  1. Seyhan Boyoglu, Komal Vig, Shreekumar Pillai, Vijay Rangari , Vida A. Dennis, Praseetha Subbarayan, Shree R. Singh, “Enhanced Delivery and Expression of Nanoencapsulated DNA Vaccine Vector,” Nanomedicine: Nanotechnology, Biology and Medicine, Volume 5, Issue 4, December 2009, Pages 463-472
  2. M.F. Uddin, H. Mahfuz, S. Zainuddin, S. Jeelani, “Improving Ballistic Performance of Polyurethane Foam by Nanoparticle Reinforcement,” Journal of Nanotechnology 2009, doi:10.1155/2009/794740, 2009.
  3. Jessie Mayo, Eric Wetzel, Mahesh Hosur, Shaik Jeelani, “Stab and Puncture Characterization of Thermoplastic-Impregnated Aramid Fabrics,” International Journal of Impact Engineering, Volume 36, Issue 9, September 2009, Pages 1095-1105.
  4. Y.-H. Phillip Lee, Sateesh Sathigari, Y.-J. Jean Lin, William R. Ravis, Gurkishan Chadha, Daniel L. Parsons, Vijay K. Rangari, Nydeia Wright, R. Jayachandra Babu, “Gefitinib–cyclodextrin inclusion complexes: physico-chemical characterization and dissolution studies,”  Drug Development and Industrial Pharmacy Sep 2009, Vol. 35, No. 9, Pages 1113-1120: 1113-1120.
  5. Vijaya K Rangari, Tarig A Hassan, Quentin Mayo and Shaik Jeelani, “Size reduction of WO3 nanoparticles by ultrasound irradiation and its applications in structural nanocomposites,” Composite Science and Engineering, 69, 2009, 2293-2300
  6. Hassan Mahfuz, Floria Clements, Vijaya Rangari, Vinod Dhanak and Graham Beamson,  “Enhanced Stab Resistance of Flexible Body Armor with Functionalized Silica Nanoparticles,” Journal of Applied Physics, 105, 064307, 2009
  7. Mahesh V. Hosur, Orion Gebremedin, Shaik Jeelani, “Processing and Performance Evaluation of Nanoclay Infused EPON 828,” Polymer & Polymer Composites, 17 (3), 2009, pp. 151-160.
  8. Vijaya K. Rangari, Mohammed Y.Shaik and Shaik Jeelani, “Fabrication and characterization of high strength Nylon-6/Si3N4 polymer nanocomposites fibers,” Materials Science and Engineering A, 500, 92-97, 2009.
  9. Hassan Mahfuz, Shaik Zainuddin, Martin R. Parker, Tariq Al-Saadi, Vijay K. Rangari, Shaik Jeelani, “Reinforcement of SC-15 epoxy with CNT/CNF under high magnetic field: an investigation of mechanical and thermal response,” J Mater Sci, 44:1113–1120, 2009.
  10. Vijaya K. Rangari, Mohammed Y. Shaik and Shaik Jeelani, “Fabrication and characterization of high strength Nylon-6/Si3N4 polymer nanocomposites fibers,” Materials Science and Engineering A, 500, 92-97, 2009.
  11. S. Zainuddin, M. V. Hosur, Y. Zhou, A. Kumar, and S. Jeelani, “Durability studies of montmorillonite clay filled epoxy composites under different environmental conditions,” Materials Science and Engineering, 507, 2009, pp. 117–123.
  12. Mahfuz, H., Clements, F., Rangari, V., Dhanak, V. and Beamson, G., “Enhanced Stab Resistance with Functionalized Silica Nanoparticles,” Journal of Applied Physics 105, 064307 (2009).
  13. Mahesh V. Hosur, Md. Mazedul Islam, Shaik Jeelani, “Processing and performance of nanophased braided carbon/epoxy composites,” Materials Science and Engineering B doi:10.1016/j.mseb.2009.10.015, 2009
  14. Md. A. Bhuiyan, M. V. Hosur, S. Jeelani, “Low –Velocity Impact Response of Sandwich Composites with Nanophased Foam Core and Biaxial (±45°) Braided Face Sheets,” Composites Part B: Engineering, Volume 40, Issue 6, September 2009, Pages 561-571.
  15. Dwayne Vickers, Tamara Floyd-Smith and Lynden Archer, “Synthesis and Characterization of Cubic Cobalt Oxide Nanocomposite Fluids,” Colloids and Surfaces A, 10.1016/j.colsurfa.2009.06.025.
  16. Yuanxin Zhou, M.I. Jeelani, and Shaik Jeelani, “Fabrication and characterization of carbon/epoxy composites mixed with multi-walled carbon nanotubes,” Materials Science and Engineering: A, Volume 475, Issues 1-2, 25 February 2008, Pages 157-165
  17. Mahfuz, H., Zainuddin, S., Parker, M.R., Al-Saadi, T., Rangari, V.K. and Jeelani, S., “Reinforcement of SC-15 Epoxy with CNT/CNF under High Magnetic Field – An Investigation of Mechanical and Thermal Response,” Journal of Materials Science, Volume 44, Number 4, January 2009, Pages 1113-1120.
  18. S Sathigari, GS Chadha, Y-H Lee, N Wright, DL Parsons, VK Rangari, O Fasina, RJ Babu, “Effect of cyclodextrin complexation on the improvement of solubility and dissolution rate of Efavirenz,” AAPS Pharm Sci Tech. 

2008

  1. Theotokoglou, E.E., Hortis. D., Carlsson, L.A. and Mahfuz, H., “Numerical Study of Fractured Sandwich Composites under Flexural Loading,” Journal of Sandwich Structures and Materials 2008; 10; 75
  2. M. V. Hosur, A. A. Mohammed, S. Zainuddin, and S. Jeelani, “Impact Performance of Nanophased Foam Core Sandwich Composites,” Materials Science and Engineering, A Vol. 498, No. 1-2, 2008, pp. 100-109.
  3. M. V. Hosur, A. A. Mohammed, and S. Jeelani, “Processing of Nanoclay Filled Sandwich Composites and their Response to Impact Loading,” Journal of Reinforced Plastic and Composites, Vol. 27, No 8, 2008, pp. 797-818.
  4. Hosur M. V., Mayo Jr. J. B., Wetzel E., and Jeelani S., “Studies on the Fabrication and Stab Resistance Characterization of Novel Thermoplastic-Kevlar Composites,” Advanced Structural and Functional Materials for Protection, Solid State Phenomena Vol. 136, 2008, pp. 83-92.
  5. Ingram J., Yuanxin Zhou, Jeelani S., Lacy T., and Horstmeyer M.F., “Effect of strain rate on tensile behavior of polypropylene and carbon nanofiber filled polypropylene,” Materials Science and Engineering: A, 489(2008) Pages 99-106
  6. Jones I. K., Yuanxin Zhou, Jeelani S., Mabry J.M., “Effect of polyhedral-oligomeric-sil-sesquioxanes on thermal and mechanical behavior of SC-15 epoxy,” Express Polymer Letters, (2)2008: 494-501.
  7. Vijaya K Rangari, Tarig A. Hassan, Clifton Mayo and Shaik Jeelani, “Titanium carbide infused phenolic balsa foam nanocomposite,” International Journal of Nanoscience, 7, 235-243, 2008.
  8. Vijaya K. Rangari, Mohammed Yousuf, Shaik Jeelani, Merlyn X. Pulikkathara and Valery N. Khabashesku, “Alignment of carbon nanotubes and reinforcing effects in Nylon-6 polymer composite fibers,” Nanotechnology, 19, 245703-245712, 2008.
  9. Hassan Mahfuz, Mohammad Hasan, Vinod Dhanak, Graham Beamson, Justin Stewart, Vijaya Rangari, and Shaik Jeelani, “Enhancing the properties of nylon 6 filaments with functionalized silica nanoparticles,” Nanotechnology, 19, 445702-445706, 2008.
  10. M. V. Hosur, A. A. Mohammed, S. Zainuddin and S. Jeelani, “Processing of Nanoclay Filled Sandwich Composites and their Response to Low-Velocity Impact Loading,” Composite Structures, Vol. 82, 2008, pp. 101-116.
  11. Ayorinde, E., Gibson, R., Kulkarni, S., Deng, F., Mahfuz, H., Islam, S., Jeelani, S., “Reliable low-cost NDE of Composite Marine Sandwich Structures,” Composites: Part B, 39 (2008) 226-241.
  12. Vijaya K. Rangari, Mohammad, I, Jeelani Yuanxin Zhou and Shaik Jeelani, “Fabrication and characterization of MWCNT/thermoplastic microsphere nanocomposite foams,” International Journal of Nanoscience, 7, 161-169, 2008.
  13. Yuanxin Zhou, Peixuan Wu, Zhongyang Cheng, Joranda Ingram and Shaik Jeelani, “Improvement in electrical, thermal and mechanical properties of epoxy by filling carbon,” Express Polymer Letter, 2008, 2(1), 40-48.
  14. Rangari, V., Shaik, M, Mahfuz, H. and Jeelani, S., “Fabrication and Characterization of High Strength Nylon-6/Si3N4 Polymer Nanocomposites Fibers,” Materials Science & Engineering A, (2008) DOI:10.1016/j.msea.2008.09.014
  15. B. Bey, Yuanxin Zhou, Shaik Jeelani, Ashok Kumar and L.D. Stephenson, “Nonlinear constitutive equation for temperature degraded unidirectional carbon fiber reinforced epoxy,” Materials Letters, Volume 62, Issues 21-22, 15 August 2008, Pages 3659-3662
  16. Yuanxin Zhou, Farhana Pervin, Shaik Jeelani and P.K. Mallick, “Improvement in mechanical properties of carbon fabric–epoxy composite using carbon nanofibers,” Journal of Materials Processing Technology, Volume 198, Issues 1-3, 3 March 2008, Pages 445-453
  17. Yuanxin Zhou, Farhana Pervin, Lance Lewis and Shaik Jeelani, “Fabrication and characterization of carbon/epoxy composites mixed with multi-walled carbon nanotubes,” Materials Science and Engineering: A, Volume 475, Issues 1-2, 25 February 2008, Pages 157-165 

2007

  1. Vijaya K. Rangari, Tarig A. Hassan, Yuanxin Zhou, Hassan Mahfuz1 and Shaik Jeelani, “Cloisite Clay Infused Phenolic Foam Nanocomposite,” Journal of Applied Polymer Science, 103, 308-314, 2007
  2. Mahfuz, Hassan; Hasan, Mohammad M.; Rangari, Vijaya K.; Jeelani, Shaik. “Reinforcement of nylon-6 filaments with SiO2 nanoparticles and comparison of Young's modulus with theoretical bounds,” Macromolecular Materials and Engineering, 292 (4), 437-444, 2007.
  3. Hassan Mahfuz, Shaik Zainuddin, Martin R. Parker, Tariq Al-Saadi, Vijaya K. Rangari, Shaik Jeelani. “Enhancement of strength and stiffness of epoxy-based composites using nanoparticle infusion and high magnetic fields,” Materials Letters, 61, 2535–2539, 2007.
  4. Rangari, V., Hassan, T., Zhou, Y., Mahfuz, H., Jeelani, and Prorok, B., “Cloisite Clay-Infused Phenolic Foam Nanocomposites,” Journal of Applied Polymer Science, Vol. 103, 308-314 (2007).
  5. Mahfuz, H., Hasan, M., Rangari, V., and Jeelani, S., “Reinforcement of Nylon 6 Filaments with SiO2 Nanoparticles and Comparison of Young’s Modulus with Theoretical Bounds,” Macromolecular Materials & Engineering 2007, 292, 437-444.
  6. Adnan, A., Sun, C.T., and Mahfuz, H., “A molecular Dynamics Simulation Study to Investigate the Effect of Filler Size on Elastic Properties of Polymer Nanocomposites,” Composites Science and Technology 67 (2007) 348-356.
  7. M. V. Hosur, M. Abdullah, S. Jeelani, “Dynamic Compression Behavior of Integrated Core Sandwich Composites,” Materials Science and Engineering-A, Vol. 445-446, 2007, pp. 54-64.
  8. M. V. Hosur, K. Jain, F. Chowdhury, S. Jeelani, M. R. Bhat, C. R. L. Murthy, “Low-Velocity Impact Response of Carbon/Epoxy Laminates Subjected to Cold-Dry and Cold-Moist Conditioning,” Composite Structures, Vol. 79, 2007, pp. 300-311.
  9. M. V. Hosur, F. Chowdhury, and S. Jeelani, “Processing, Impact Response and Damage Characterisation of Plain-Weave Carbon/Epoxy-Nanoclay Nanocomposites,” Polymer and Polymer Composites, Vol. 15, No. 6, 2007, pp.425-435.
  10. C. Lew, F. Chowdhury, M. V. Hosur, A. N. Netravali, “The Effect of Silica (SiO2) Nanoparticles and Ammonia/Ethylene Plasma Treatment on the Interfacial and Mechanical Properties of Carbon Fiber-Reinforced Epoxy Composites,” Journal of Adhesion Science and Technology, Vol. 21, No. 14, 2007, pp. 1407-1424.
  11. Yuanxin Zhou, Farhana Pervin, Lance Lewis and Shaik Jeelani, “Experimental study on the thermal and mechanical properties of multi-walled carbon nanotube-reinforced epoxy,” Materials Science and Engineering: A, Volume 452-453, 2007 pp. 657-664.
  12. Yuanxin Zhou, Sajedur Rahman Akanda, Shaik Jeelani and Thomas E. Lacy, Nonlinear Constitutive Equation for Vapor-Grown Carbon Nanofiber-Reinforced SC-15 Epoxy at Different Strain Rate, Materials Science and Engineering: A, 465, n 1-2, Sep 15, 2007, p 238-246.
  13. M. V. Hosur, F. Chowdhury, and S. Jeelani, “Low-Velocity Impact Response and Ultrasonic NDE of Woven Carbon/Epoxy-Nanoclay Nanocomposites,” Journal of Composite Materials, Vol. 41, No. 18, Sept. 2007, pp. 2195-2212.
  14. Yuanxin Zhou, Farhana Pervin, Shaik Jeelani, “Effect vapor grown carbon nanofiber on thermal and mechanical properties of epoxy,” Journal of Materials Science, v 42, n 17, August, 2007, p 7544-7553.
  15. F. H. Chowdhury, M.V. Hosur, S. Jeelani, “Investigations on the Thermal and Flexural Properties of Plain Weave Carbon/Epoxy-Nanoclay Composites by Hand-Layup Technique,” Journal of Materials Science, Vol. 42, No.8, April, 2007, pp. 2690-2700.
  16. M. Hasan, Yuanxin Zhou and Shaik Jeelani, “Thermal and tensile properties of aligned carbon nanofiber reinforced polypropylene,” Materials Letters, Volume 61, Issue 4-5, February 2007, Pages 1134-1136
  17. Yuanming Xia, Ying Wang, Yuanxin Zhou and Shaik Jeelani, “Effect of strain rate on tensile behavior of carbon fiber reinforced aluminum laminates ,” Materials Letters, Volume 61, Issue 1, January 2007, Pages 213-215
  18. Yuanxin Zhou, Yuanming Xia, Ying Wang and Shaik Jeelani, “Experimental study on tensile behavior of carbon fiber and carbon fiber reinforced aluminum at different strain rate,” Applied Composite Materials, Volume 14, Number 1,   January, 2007, pp. 17-31
  19. V. K., Rangari, T. A. Hassan, Yuanxin Zhou; Hassan Mahfuz, Shaik Jeelani ; B. C. Prorok, “Cloisite clay-infused phenolic foam Nan composites,” Journal of Applied Polymer Science, v 103, n 1, Jan 5, 2007, p 308-314.
  20. Salekeen, S., Amoako, J.N., Mahfuz, H., and Jeelani, S., "Mechanical property degradation of a Nicalon fiber reinforced SiNC ceramic matrix composite under thermal shock loading," Composite Structures 78(4), 2007, 477–485.
  21. Xia, Y.M., Wang, Y., Zhou, Y., and Jeelani, S., “Effect of strain rate on tensile behavior of carbon fiber reinforced aluminum laminates,” Materials Letters 61(1), 2007, 213-215. 

2006

  1. Zhou, Y., Pervin, F., Biswas, M., Rangari K., and Jeelani, S., "Fabrication and Characterization of Montmorillonite Clay-filled SC-15 Epoxy," Materials Letters, 60(7) (2006), 869-873.
  2. Zhou, Y., Baseer, M., Mahfuz, H., and Jeelani, S., "Monte Carlo Simulation on Tensile Failure Process of Unidirectional Carbon Fiber Reinforced Nano-Phased Epoxy," Materials Science and Engineering A, 420(1-2) (2006), 63-71.
  3. Zhou, Y., Pervin, P., Rangari, V., and Jeelani, S., Fabrication and evaluation of carbon nano fiber filled carbon/epoxy composite  Materials Science and Engineering: A,  426(1-2) (2006), 221-228.
  4. Hasan, M., Zhou, Y., Mahfuz, S., and Jeelani, S., "Effect of SiO2 nanoparticle on thermal and tensile behavior of nylon-6," Materials Science and Engineering: A, 429(1-2) (2006), 181-188.
  5. Mahfuz, H., Adnan, A., Rangari, V., Hasan, M., Jeelani, S., Wright, W. J., and Deteresa, S. J., "Enhancement of Strength and Stiffness of Nylon 6 Filaments through Carbon Nanotubes Reinforcement," Applied Physics Letters, 88(2006), 083119.
  6. Chowdhury, F.H., Hosur, M.V., Jeelani, S., "Studies on the Flexural and Thermomechanical Properties of Woven Carbon/Nanoclay-Epoxy Laminates," Materials Science and Engineering A, 421, 2006,  298-306
  7. Hosur, M.V., Waliul Islam, S.M., and Jeelani, S., "Dynamic Punch Shear Characterization of Twill Weave Graphite/Epoxy Composites," Polymers and Polymer Composites, Vol. 14, No. 2, 2006, pp. 135-143
  8. Vaidya, U.K., Gautam, A. R. S., Hosur, M. V., and Dutta, P., "Experimental-Numerical Studies of Transverse Impact Response of Adhesively Bonded Lap Joints in Composite Structures," International Journal of Adhesion and Adhesives, Vol. 26, No. 3, June 2006, pp.184-198.
  9. Kabir, W.E., Saha M.C., and Jeelani, S., "Tensile and fracture behavior of polymer foams," Materials Science and Engineering: A 429 (1-2), 2006, 225-235.
  10. Zhou, Y., Baseer, M.A., Mahfuz, H., and Jeelani, S., “Statistical analysis on the fatigue strength distribution of T700 carbon fiber,” Composites Science and Technology 66 (13), 2006, 2100-2106. 

2005

  1. H. Mahfuz, M. Uddin, Vijaya K. Rangari, M. Saha, S. Zainuddin, S. Jeelani, “High Strain Rate Response of Sandwich Composites with Nanophased Cores,” Applied Composite Materials, Vol. 12, 2005, pp. 193-211.
  2. Chisholm, N., Mahfuz, H., Rangari, V., Ashfaq, A. and Jeelani, S., “Fabrication and Mechanical Characterization of Carbon/Epoxy Nanocomposites,” Composite Structures 67 (2005) 115-124.
  3. Saha, M., Joarder, C., Mahfuz, H., Jeelani, S., Srinivasgupta, D., Joseph, B., Thomas, M., and Christensen, S., “Manufacturing and Tensile Characteristics of Integral Sandwich Tee Joints,” Journal of Advanced Materials, 37(1) (2005), 53-60.
  4. Mahfuz, H., Baseer, M.A., Rangari, V.J., Jeelani, S. “Fabrication, Characterization and Mechanical Properties of Nanophased Carbon Prepreg Laminates,” SAMPE Journal, 41(2) (2005), 40-48.
  5. Saha, M., Mahfuz, H., Chakravarty, U., Uddin, M., Kabir, M., Jeelani, S., “Effect of Density, Microstructure, and Strain Rate on Compression Behavior of Polymeric Foams,” Materials Science and Engineering A, 406(1-2) (2005), 328-336.
  6. Mahfuz, H., Adnan, A., Rangari, V., and Jeelani, S, “Manufacturing and Characterization of Carbon Nanotube/Polyethylene Composites,” International Journal of Nanoscience (IJN), 4(1) (2005), 55-72.
  7. Mahfuz, H., Islam, S., Saha, M., Carlsson, L., and Jeelani, S., “Buckling of Sandwich Composites; Effects of Core-Skin Debonding and Core Density," Applied Composite Materials, 2(2) (2005), 73-91.
  8. Rodgers, R., Mahfuz, H., Rangari, V., Chisholm, N., and Jeelani, S., “Infusion of Nanoparticle into SC-15 Epoxy; an Investigation of Thermal and Mechanical Response," Macromolecular Materials & Engineering, 290(5) (2005), 423-429.
  9. Hosur, M. V., Islam, W., Vaidya, U. K., Dutta, P. and Jeelani, S.  “Dynamic Punch Shear Characterization of Plain Weave Graphite/Epoxy Composites at Room and Elevated Temperatures,” Composite Structures, 70(3) (2005), 295-307.
  10. Hosur, M. V., Abdullah, M., and Jeelani, S.  “Manufacturing and Low-Velocity Impact Characterization of Foam Filled 3-D Integrated Core Sandwich Composites with Hybrid Face Sheets,” Composite Structures, 69(2) (2005), 167-181.
  11. Hosur, M. V., Islam, W., Vaidya, U. K., Dutta, P. and Jeelani, S.  “Studies on the Low-Velocity Impact Response of Woven Hybrid Composites,” Composite Structures, 67(3) (2005), 253-262.
  12. Zhou, Y.;  Mahfuz, H.; Jeelani, S.; Mallick, P.K. “Experimental Study on Tensile Behavior of Short Fiber Reinforced Nylon-6 at Different Strain Rate and Temperature,” International SAMPE Symposium and Exhibition (Proceedings), v 50, SAMPE 05: New Horizons for Materials and Processing Technologies - Conference Proceedings, 2005, p 1613-1624, May (2005), Long Beach CA.
  13. Zhou, Y., Mahfuz, H., and Jeelani, S., “Numerical Simulation for High Strain  Rate Failure Process of Unidirectional SiCf/Al Composites,” International Journal of Damage Mechanics, 14(4) (2005), 321-341.
  14. Farhana, P., Zhou, Y., Rangari, V., and Jeelani, S., “Testing and Evaluation on the Thermal and Mechanical properties of Carbon Nano Fiber reinforced SC-15 Epoxy,” Materials Science and Engineering A, 405(1-2) (2005), 246-253.
  15. Zhou, Y., Rangari, V., Mahfuz, H., Jeelani, S., and P. K. Mallick, “Thermal and Mechanical behavior of Polypropylene, Talc-filled Polypropylene and Polypropylene Nanocomposites,” Materials Science and Engineering A, 402(1-2) (2005), 109-117. 

2004

  1. Hosur, M. V., Adya, M., Vaidya, U. K., Dutta, P. and Jeelani, S. “Experimental Studies on the High Strain Rate Compression Response of Woven Graphite/Epoxy Composites at Room and Elevated Temperatures,” Journal of Reinforced Plastics and Composites, Vol. 23, No. 5 (2004), pp. 491-514.
  2. Hosur, M. V., Alexander, J., Vaidya, U.K., Mayer, A. and Jeelani, S. “Studies on the Off-Axis High Strain Rate Compression Loading of Satin Weave Carbon/Epoxy Composites," Composite Structures, Vol. 63 (2004), pp.75-85.
  3. Hosur, M. V., Karim, R. M., and Jeelani, S. "On the Response of Stitched S2-Glass/Epoxy Composites to High Strain Rate Compression Loading," Polymer and Polymer Composites, Vol. 12, No. 3 (2004), pp.183-196.
  4. Hosur, M. V., Vaidya, U. K., Ulven, C. and Jeelani, S. "Performance of Stitched/Unstitched Woven Carbon/Epoxy Composites Under High Velocity Impact Loading," Composite Structures, Vol. 64, No. 3-4, (2004), pp. 455-466.
  5. Hosur, M. V., Islam, W., Vaidya, U. K., Dutta, P. and Jeelani, S. "Experimental Studies on the Dynamic Punch Shear Characterization of Satin Weave Graphite/Epoxy Composites," Materials Science Engineering A., 368, (2004), pp. 269-279.
  6. Hosur, M. V., Abdullah, M. and Jeelani, S. "Manufacturing and Low Velocity Impact Characterization of Hollow-Core Sandwich Composites with Hybrid Face sheets," Composite Structures, Vol. 65, No.1 (2004), pp. 103-115.
  7. Hosur, M. V., Karim, R. and Jeelani, S. "Studies on Stitched Woven S2-Glass/Epoxy Laminates under Low Velocity and Ballistic Impact Loading," Journal of Reinforced Plastics and Composites, Vol. 23, No. 12 (2004), pp. 1313-1324.
  8. Hosur, M. V., Abdullah, M. and Jeelani, S. "Studies on Low-Velocity Impact Response of Woven Hybrid Composites," Composite Structures, Vol. 67, No. 3 (2004), pp. 253-262.
  9. Hosur, M. V., Abdullah, M. and Jeelani, S. "Manufacturing and Low Velocity Impact Characterization of Foam-Filled 3-D Integrated Core Sandwich Composites with Hybrid Face Sheets," Composite Structures, Vol. 69, No. 2 (2004), pp. 167-181.
  10. Kanny, K., Mahfuz, H., Thomas, T. and Jeelani, S., "Fatigue of Cross-linked and Linear PVC Foams under Shear Loading," Journal of Reinforced Plastics and Composites, Vol. 23 No. 6 (2004), pp. 601-612.
  11. Thomas, T., Mahfuz, H., Kanny, K. and Jeelani, S.," High Strain Rate Response of Cross-linked & Linear PVC Foams," Journal of Reinforced Plastics and Composites, Vol. 23, No. 7 (2004), pp. 739-749.
  12. Kulkarni, N., Mahfuz, H. and Jeelani, S., “ Fatigue Failure Mechanism and Crack Growth in Foam Core Sandwich Composites under Flexural Loading,” Journal of Reinforced Plastics and Composites, Volume 23, No. 1(2004), pp. 83-94.
  13. Thomas, T., Mahfuz, H., Kanny, K., and Jeelani, S.," Dynamic Compression of Sandwich Composites at Sub-Ambient Temperatures," Journal of Composite Materials, Vol. 38, No. 8 (2004), pp. 641-654.
  14. Kanny, K., Mahfuz, H., Thomas, T., and Jeelani, S, "Static and Dynamic Characterization of Polymer Foams under Shear Loads, Journal of Composite Materials, Vol. 3,  No. 8 (2004), pp. 629-640.
  15. Mahfuz, H., Rangari, V., Islam, M., and Jeelani, S.," Fabrication, Synthesis and Mechanical Characterization of Nanoparticles Infused Polyurethane Foams," Composites Part A: Applied Science and Manufacturing, Vol. 35 No. 4 (2004), pp. 453-460.
  16. Mahfuz, H., Islam, M., Rangari, V., Saha, M. and Jeelani, S., "Response of Sandwich Composites with Nanophased Cores under Flexural Loading," Composites Part B: 35 (2004) 543-550.
  17. Mahfuz, H., Adnan, A., Rangari, V., and Jeelani, S, "Carbon Nanoparticles/Whiskers Reinforced Composites and their Tensile Response," Composites Part A: Applied Science and Manufacturing, Vol. 35 (2004) 519-527.
  18. Mahfuz, H., Majumdar, P., Saha, M. and Jeelani, S., "Integral Manufacturing of Composite Skin-Stringer Assembly and their Stability Analyses," Applied Composite Materials, 11 (3):  (2004)155-171. 

2003

  1. Mahfuz, H., Gama, B., Das, P., Jeelani, S., Gillispie, J. and Fink, B., "Response of S2-Glass/Vinyl Ester Composites under High Strain Rate Loading - An Experimental and Finite Element Study," Journal of Advanced Materials, Vol. 35, No. 4(2003), pp.36-43.
  2. Kulkarni N., Mahfuz, H., Jeelani, S. and Carlsson, L."Fatigue Crack Growth and Life Prediction in Foam Core Sandwich Composites under Flexural Loading," Composite Structures, 59 (2003), pp. 499-505.
  3. Hosur, M. V., Alexander, J., Vaidya, U. K., Mayer, A. and Jeelani, S., "High Strain Rate Compression Response of Affordable Woven Carbon/Epoxy Composites" Journal of Reinforced Plastics and Composites, Vol. 22, No. 3, (2003), pp. 271-296.
  4. Hosur, M. V., Islam, W., Jeelani, S., Vaidya, U. K., and Dutta, P. "Effect of Temperature and Moisture on the High Strain Rate Response of Graphite/Epoxy Composites," Journal of Engineering Materials and Technology, Vol. 125, (2003), pp.1-8.
  5. Hosur, M. V., Myers, D., Vaidya, U. K. and Jeelani, S. "Studies on the Repair of Ballistic Impact Damage in S2-Glass/Epoxy Laminates," Composite Structures, 61, No. 4 (2003), pp. 281-290.
  6. Hosur, M. V., Alexander, J., Vaidya, U. K., Mayer, A. and Jeelani, S. "Studies on Impact Damage Resistance of Affordable Stitched Woven Carbon/Epoxy Composite Laminates"' Journal of Reinforced Plastics and Composites, Vol. 22, No. 10 (2003), pp.927-952.
  7. Hosur, M. V., Adya, M, Vaidya, U. K., Mayer, A. and Jeelani, S.   "Effect of Stitching and Weave Architecture on the High Strain Rate Compression Response of Affordable Woven Carbon/Epoxy Laminates," Composite Structures, 59 (2003), pp. 507-523.
  8. Hosur, M. V., Karim, M. R. and Jeelani, S. "Experimental Investigation on the Response of Stitched/Unstitched Woven S2-Glass/SC-15 Epoxy Composites under Single and Repeated Low Velocity Impact Loading" Composite Structures, 61, No. 1-2 (2003), pp.89-102.
  9. Hosur, M. V., Alexander, J., Vaidya, U. K., Mayer, A. and Jeelani, S. "Off- Axis High Strain Rate Characterization of Plain Weave Carbon/Epoxy Composites," Polymers and Polymer Composites, Vol. 11, No. 7 (2003), pp. 527-540.
  10. Chakravarty, U., Mahfuz, H., Saha, M. and Jeelani, S.," Strain Rate Effects on Sandwich Core Materials: An Experimental and Analytical Investigation," Acta Materialia, 51 (2003) 1469-1479.
  11. Mahfuz, H., Adnan, A., Rangari, V. and Jeelani, S., "Carbon Nanoparticles/Whiskers Reinforced Composites and their Tensile Response," 48th International SAMPE Symposium,  Long Beach CA, Vol. 48, May 11-15 (2003), pp. 2559-2571

2002

  1. Mahfuz, H., Mamun, W. and Jeelani, S. "High Strain Rate Response of Sandwich Composites; Effect of Core Density and Core-Skin Debond," Journal of Advanced Materials, Vol. 34, No. 1, January (2002), pp. 22-26.
  2. Kanny, K., Mahfuz, H., Thomas, T. and Jeelani, S. "Dynamic Mechanical Analysis and Flexural Fatigue of PVC Foams," Composite Structures, 58 (2002), pp. 175-183.
  3. Thomas, T., Mahfuz, H., Kanny, K. and Jeelani, S. "Dynamic Compression of Cellular Cores: Temperature and Strain Rate Effects," Composite Structures, 58 (2002), pp. 505-512. 

2001

  1. Hosur, M. V., Alexander, J. Vaidya U. K. and Jeelani, S. "High Strain Rate Compression Response of Carbon/Epoxy Laminate Composites," Journal of Composite Structures, 52 (2001), 405-417.
  2. Mahfuz, H., Mamun, W., Austin, L., Haque, A. and Jeelani, S. "New Formulations for Hopkinson Bar Technique to Extract a Response of the Constituent Material in Composite Specimens," Journal of Materials: Design and Applications, Vol. 215,(2001) pp. 15-27.
  3. Hosur, M. V., Abraham, A., Jeelani, S. and Vaidya, U. K. "Studies on the Influence of Through-The-Thickness reinforcement on Low-Velocity and High Strain rate response of Woven S2-Glass/Vinyl Ester Composites," Journal of Composite Materials, Vol. 35, No. 12,(2001), 1111-1133.
  4. Gama, B., Gillespie, J., Mahfuz, H., Bogetti, T., Fink, B. and Jeelani, S. "High Strain Rate Behavior of Plain-Weave S-2 Glass/Vinyl ester Composites," Journal of Composite Materials, Vol. 35, No. 13 (2001), pp. 1201-1228. 

2000

  1. Vaidya, U. K., Hosur, M. V., Earl, D. and Jeelani, S.  "Impact Response of Integrated Hollow Core Sandwich Composite Panels," Composites Part A: Applied science and Manufacturing Vol. 31 (8), (2000) pp. 761-772.
  2. Mahfuz, H., Zhu, Y., Haque, A., Vaidya, U. K. and Jeelani, S.  "Investigation of High Velocity Impact on Integral Armor Using Finite Element Method," International Journal of Impact Engineering, Vol. 24, No. 2 (2000), pp. 203-217. 
  3. Mahfuz, H., Mamun, W., Haque, A., Vaidya, U. K. and Jeelani, S. "An Innovative Technique for Measuring the High Strain Rate Response of Sandwich Composites," Composite Structures, 50 (2000) 279-285.
  4. Mahfuz, H., Zaman, K., Hisham, M. Foy, C., Haque, A. and Jeelani, S. "Fatigue Life Prediction of Thick-Section S2-Glass/Vinyl-Ester Composites under Flexural Loading," Transaction of ASME, Journal of Engineering Materials and Technology, Vol. 122, (2000), pp. 402-408.
  5. Motuku, M., Janowski, G. M., Vaidya, U. K., Mahfuz, H. and Jeelani, S. "Damage Evolution in Low-Velocity Impacted Unreinforced Vinyl Ester 411-350 and 411-C50 Resin Systems," Polymer Composites, No. 6, Vol. 21, (2000), pp.878-899.
  6. Mahfuz, H., Islam, S., Carlsson, L., Atkins, M. and Jeelani, S. "Effect of Implanted Delamination and Core Density on the Buckling Behavior of Sandwich Composites," ASME 2000, AMD-Vol. 245, Mechanics of Sandwich Structures, pp. 143-150.
  7. Mahfuz, H., Mamun, W. and Jeelani, S. "Effect of Core Density and Implanted Delamination in the High Strain Rate Response of Foam Core Sandwich Composites," Sandwich Construction 5, Volume 2 (2000), pp. 597-606. 

1991-1999

  1. Hosur, M. V., Vaidya, U. K., Abraham, A., Jadhav, N. and Jeelani, S. "Static and High Strain Rate Compression Response of Thick Section Twill Weave S2-Glass/Vinyl Ester Composites Manufactured by Affordable Liquid Molding Processes," Journal of Engineering Materials and Technology, Vol. 121, No. 4, (October 1999), pp. 468-475
  2. Haque, A., Rahman, M., Vaidya, U. K., Mahfuz, H. and Jeelani, S. " Tensile Behavior of Woven Ceramic Matrix Composites at Room and Elevated Temperatures: An Experimental and Numerical Study,” Key Engineering Materials, Vols. 164-165, (1999), pp. 341-344, CSI Series- Publication of the Ceramic Society of Japan, Vol. 3.
  3. Haque, A., Rahman, M., Vaidya, U. K., Mahfuz, H. and Jeelani, S. "Tensile Behavior of Woven Ceramic Matrix Composites at Room and Elevated Temperature: An Experimental and Numerical Study," Key Engineering Materials, Vols. 164-165 (1999) pp. 341-344. 
  4. Mahfuz, H., Mamun, W., Haque, A., Vaidya, U. and Jeelani, S. "Stress Wave Propagation through Fiber and Matrix in a Cylindrical Composite Coupon," Physics and Modern Topics in Mechanical and Electrical Engineering, (ISBN: 960-8052-10-6), World Scientific and Engineering Society Press, (1999) pp. 151-158.
  5. Motuku, M., Janowski, G. M., Vaidya, U. K., Mahfuz, H., and Jeelani, S. "Low Velocity Impact Characterization of Unreinforced Vinyl Ester 411-350 and 411-C50 Resin Systems," Polymer & Polymer Composites, Vol. 7, No. 6, (1999), pp. 383-407.
  6. Gajiwala, H. M., Vaidya, U. K., Sodah, S. and Jeelani, S. "Hybridized Resin Matrix Approach Applied for Development of Carbon/Carbon Composites: Part-I," Carbon, Vol. 36, No. 7-8, (1998), pp. 903-912. 
  7. Mahfuz, H., Saha, M., Biggs, R. and Jeelani, S. "Damage Tolerance of Resin Infiltrated Composites under Low Velocity Impact - Experimental and Numerical Studies," Key Engineering Materials, Trans. Tech Publications, Switzerland, Vol. 141-143 (1998), pp. 209-234. 
  8. Mahfuz, H., Mian, A. K. M., Vaidya, U. K., Brown, T. and Jeelani, S. "Finite Element Study of the Fiber-Matrix Interface Behavior of [0/90] Laminated Composites Under Tensile Loading," Journal of Materials Science, 33 (1998) 2965-2973. 
  9. Mahfuz, H., Muneeruzzaman, M., Vaidya, U. K. and Jeelani, S. "Response of SiCfSi3N4 Composites under Cyclic Loading - An Experimental and Statistical Analysis," Transaction of the ASME, Journal of Engineering Materials and Technology, Vol. 119, (April 1997), pp 186-193.
  10. Mahfuz, H., Haque, A., Yu, D. and Jeelani, S. "Response of Resin Transfer (RTM) Composites under Reverse Cyclic Loading," Transaction of the ASME, Journal of Engineering Materials and Technology, Vol. 118, (1996), pp. 49-57.
  11. Vaidya, U. K., Mahfuz, H. and Jeelani, S. "NDE of Structural and Functional Carbon/Carbon Composites after First Carbonization," Journal of Advanced Materials, Vol. 26, (1995) No. 2, pp. 41-47.
  12. Mahfuz, H., Zadoo, D., Wilks, F., Muneeruzzaman, M. and Jeelani, S., "Fracture and Flexural Characterization of SiCw/SiC Composites at Room and Elevated Temperatures," Journal of Materials Science, Vol. 30, (1995) pp. 2406-2411.
  13. Mahfuz, H., Muneeruzzaman, M., Vaidya, U. K. and Jeelani, S. "Fatigue Damage and Effects of Stress Ratio on the Fatigue Life of Carbon-Carbon Composites," Theoretical and Applied Fracture Mechanics, 24 (1995), 21-31.
  14. Mahfuz, H., Xue, D., Jeelani, S., Baker, D. M. and Johnson, S. "Response of SiC Coated Carbon-Carbon Composites at Room and Elevated Temperatures under Tensile Loading," Composite Science and Technology, 50 (1994) 411-422.
  15. Haque, A., Mahfuz, H., Ingram, C. and Jeelani, S. "Response of Thermoplastic and Thermosetting Composites Under Compressive Loading- An Experimental and Finite Element Study," Composites Engineering, Vol. 4, No. 6, (1994), pp. 637-651.
  16. Mahfuz, H., Yu, T. and Jeelani, S. "High Cycle Fatigue Characterization of Titanium 5A1-2.5Sn Alloy," Journal of Materials Science, 28 (1993), pp. 138-144.
  17. Mahfuz, H., Das, P. S., Jeelani, S., Baker, D. M. and Johnson, S., "Failure Mechanisms in Mission Cycled Carbon/Carbon Composites under Flexural Load at Room and Elevated Temperatures," Journal of Materials Science, 28 (1993) pp. 5880-5886.
  18. Mahfuz, H., Das, P. S., Jeelani, S., Baker, D. M. and Johnson, S., "Effect of Mission Cycling on the Fatigue Performance of SiC Coated Carbon-Carbon Composites," International Journal of Fatigue, Vol. 15, No. 4 (1993) pp. 283-291.
  19. Mahfuz, H., Das, P. S., Xue, D., Krishnagopalan, J. and Jeelani, S. "A Combined Experimental and Finite Element Study to Predict The Failure Mechanisms in SiC coated Carbon/Carbon Composites at Room and Elevated Temperatures Under Flexural Loading," Journal of Reinforced Plastics and Composites, Vol. 12, No. 7, (July 1993), pp. 825-842
  20. Haque, A., Krishnagopalan, J. and Jeelani, S. "Fatigue Damage in Laminated Composites," Journal of Reinforced Plastics and Composites, Vol. 12, No. 10 (October 1993), pp. 1058-1069.
  21. Haque, A. and Jeelani, S. "Environmental Effects on the Compressive Properties: Thermosetting vs. Thermoplastic Composites," Journal of Reinforced Plastics and Composites, Vol. 2, (February 1992), pp. 146-157.
  22. Huq, N., Haque, A. and Jeelani, S. "Fracture Toughness Measurements on SiC/Al203 Composite" Journal of Material Science, 27 (1992) pp. 5989-5993.
  23. Salekeen, S., Haque, A., Copes, J. S., Mahfuz, H. and Jeelani, S.  "Effects of Reinforcement Geometry on the Mechanical Properties of SiC/Al203 Composites and Prediction of Flexural Properties by Energy Method," Journal of Composites Engineering, Vol. 2, No. 4, (1992), pp. 239-247.
  24. Haque, A., Mahmood, S., Walker, L. and Jeelani, S. "Moisture and Temperature Induced Degradation in Tensile Properties of Kevlar 49/Graphite-Epoxy Hybrid Composites," Journal of Reinforced Plastics and Composites, Vol. 10/No. 2, (March 1991), pg. 132-145.
  25. Jordan, K., Clinton, R. and Jeelani, S. "An Evaluation of the Interfacial Bond Properties between Carbon Phenolic and Glass Phenolic Composites," Journal of Materials, 26, (1991), pg. 6016-6022.
  26. Rangaswamy, P Terutung, H. and Jeelani, S. "Effect of Grinding Conditions on the Fatigue Life of Titanium 5AL-2.5SN Alloy," Journal of Materials Science, 26 No. 10, (1991), pg. 2701-2706. 

1981-1990

  1. Haque, A. Moorehead, L., Zadoo, D. P. and Jeelani, S. "Hygrothermal Influence on interlaminar Shear Strength of Kevlar-Graphite/Epoxy Hybrid Composites," Journal of Materials Science, 25, (1990), pg. 4639-4643.
  2. Haque, A., Copeland, C. W., Zadoo, D. P. and Jeelani, S. "Hygrothermal Influence on Flexural Properties of Kevlar-Graphite/Epoxy Hybrid Composites," Journal of Reinforced Plastics and Composites, Vol. 9, (November 1990), pp. 602-613
  3. Jeelani, S. and Scott, M. A. "How Surface Damage Removal Affects Fatigue Life," International Journal of Fatigue, 10 No. 4, (1988), pg. 257-260
  4. Jeelani, S. and Collins, M. R. "Effect of Electric Discharge Machining on the Fatigue Life," International Journal of Fatigue, 10 No. 2, (1988), pg. 121-125.
  5. Mazumdar, P. and Jeelani, S. "Plastic Deformation - It’s Role in Fatigue Crack Propagation," Journal of Materials Science, 21, (1986), pg. 3611-3614.
  6. Mazumdar, P. and Jeelani, S. "Fatigue Crack Propagation Rate Model Based on a Dislocation Mechanism," Journal of Materials Science Letters, 5 (1986) 972-974.
  7. Jeelani, S., Natarajan, R. and Reddy, G. R. "A Sub-sized Fatigue Specimen," International Journal of Fatigue, 8, No. 3(1986).
  8. Jeelani, S., Biswas, S. and Natarajan, R. "Effect of Cutting Speed and Tool Rake Angle on Residual Stress Distribution in Machining 2024-T351 Aluminum Alloy," "A Study of Cumulative Fatigue Damage in AISI 4130 Steel,"  Journal of Materials  Science,  21, (1986), pg. 2705-2710.
  9. Jeelani, S. and Bailey, J. A. "Residual Stress Distribution in Machining Annealed 18% Nickel Maraging Steel," ASME Journal of Materials Science and Technology, Vol. 108 (1986) 93-98.
  10. Jeelani, S. and Musial, M. "Dependence of Fatigue Life on the Surface Integrity in the Machining of 2024-T351 Aluminum Alloy," Part I, "Un-lubricated Conditions".  Journal of Material Science, 20(1) (1986), pg. 155-160.
  11. Jeelani, S. and Natarajan, R.  "Residual Stress Distribution in 2024-T351 Aluminum Alloy".  Presented at the 1985, Boston, Massachusetts. ASME Conference on Computers in Engineering, Vol. 2.2 (1986), pp. 59-63.
  12. Jeelani, S. and Musial, M. "A Study of Cumulative Fatigue Damage in AISI 4130 Steel," Journal of Materials Science, 21(1) (1986), pg. 2109-2113.
  13. Jeelani, S., Ghebremedhin, S. and Musial, M. "A Study of Cumulative Fatigue Damage in Titanium 6A1-4V Alloy," International Journal of Fatigue, Vol. 8 No. 1, (1986) 23-27.
  14. Aslam, M. and Jeelani, S. "Prediction of Cumulative Fatigue Damage," Journal of Materials Science, 20, (1985), pg. 3232-3244.
  15. Jeelani, S. and Ramakrishnan, K. "Surface Damage in Machining Red Brass," Journal of Material Science, 20, (1985), pg. 3011-3017.
  16. Jeelani, S. and Ramakrishnan, K. "Surface Damage in Machining 6A1-2Sn-4Zr-2Mo. Titanium Alloy," Journal of Materials Science, 20 (1985), pg. 3425-3252.
  17. Jeelani, S. and Aslam, M. "A Study of Cumulative Fatigue Damage in 2024-T4 Aluminum Alloy," Wear, 939, (1984), pg. 207-217.
  18. Jeelani, S. and Musial, M. "Effect of Cutting Speed and Tool Rake Angle on the Fatigue Life of Aluminum Alloy 2024-T351," International Journal of Fatigue. 6(3), (1984), pg. 169-172.
  19. Jeelani, S. and Natarajan, R. "Determination of Residual Stresses in a Ring Due to Machining".  Presented at the 1984 ASME International Computers in Engineering Conference, August 12-17, 1984, Las Vegas, Nevada.  Computers in Engineering, Vol. 2 (1984), pp. 773-777.
  20. Jeelani, S. and Ramakrishnan, K. "Determination of Subsurface Plastic Strain Distribution in the Machining of Red Brass," Wear, 85, (1983), pg. 67-69.
  21. Jeelani, S. and Ramakrishnan, K. "Determination of Subsurface Plastic Strain in the Machining of 6-2-4-2 Titanium Alloy," Wear, 85, (1983), pg. 121-130.
  22. Jeelani, S. and Reddy, P. A. "A Study of Cumulative Fatigue Damage in 2011-T3 Aluminum Alloy," Journal of Materials Science and Engineering, 561, (1982), pg. 237-243.
  23. Jeelani, S. and Ramakrishnan, K. "Subsurface Plastic Deformation in Machining Annealed 18% Nickel Maraging Steel," Wear, 85, (1982), pg. 263-273.
  24. Jeelani, S. "Measurement of Cutting Temperature in Machining Using Infrared Photography," Wear, 68, (1981), pg. 191-202.
  25. Bailey, J. A. and Jeelani, S. "State of Subsurface Region in Machining Solution Treated and Aged 18% Nickel Maraging Steel," Wear, 72, (1981), pg. 237-243.

 1974-1980

  1. Bailey, J. A., Jeelani, S. and Baker, S. E. "Surface Integrity in Machining Quenched and Tempered AISI 4340 Steel," ASME, Journal of Engineering for Industry. 98 (3) 1979.
  2. Bailey, J.A, and Jeelani, S. "Determination of Subsurface Plastic Strain in Machining, Using a Embossed Grid," Wear, Vol. 36, No. 2, (1975), page 199-206.
  3. Bailey, J.A. and Jeelani, S. "Surface Integrity in Machining 18% Nickel Maraging Steel," ASME Transactions, (1974), pages 74-185.

Return to the Materials Science & Engineering home page